通過重寫ViewGroup學習onMeasure()和onLayout()方法
阿新 • • 發佈:2019-01-07
在繼承ViewGroup類時,需要重寫兩個方法,分別是onMeasure和onLayout。
1,在方法onMeasure中呼叫setMeasuredDimension方法
void android.view.View.setMeasuredDimension(int measuredWidth, int measuredHeight)
在onMeasure(int, int)中,必須呼叫setMeasuredDimension(int width, int height)來儲存測量得到的寬度和高度值,如果沒有這麼去做會觸發異常IllegalStateException。
2,在方法onMeasure中呼叫孩子的measure方法
void android.view.View.measure(int widthMeasureSpec, int heightMeasureSpec)
這個方法用來測量出view的大小。父view使用width引數和height引數來提供constraint資訊。實際上,view的測量工作在onMeasure(int, int)方法中完成。因此,只有onMeasure(int, int)方法可以且必須被重寫。引數widthMeasureSpec提供view的水平空間的規格說明,引數heightMeasureSpec提供view的垂直空間的規格說明。
3,解析onMeasure(int, int)方法
void android.view.View.onMeasure(int widthMeasureSpec, int heightMeasureSpec)
測量view及其內容來確定view的寬度和高度。這個方法在measure(int, int)中被呼叫,必須被重寫來精確和有效的測量view的內容。
在重寫這個方法時,必須呼叫setMeasuredDimension(int, int)來儲存測量得到的寬度和高度值。執行失敗會觸發一個IllegalStateException異常。呼叫父view的onMeasure(int, int)是合法有效的用法。
view的基本測量資料預設取其背景尺寸,除非允許更大的尺寸。子view必須重寫onMeasure(int, int)來提供其內容更加準確的測量數值。如果被重寫,子類確保測量的height和width至少是view的最小高度和寬度(通過getSuggestedMinimumHeight()和getSuggestedMinimumWidth()獲取)。
4,解析onLayout(boolean, int, int, int, int)方法
void android.view.ViewGroup.onLayout(boolean changed, int l, int t, int r, int b)
呼叫場景:在view給其孩子設定尺寸和位置時被呼叫。子view,包括孩子在內,必須重寫onLayout(boolean, int, int, int, int)方法,並且呼叫各自的layout(int, int, int, int)方法。
引數說明:引數changed表示view有新的尺寸或位置;引數l表示相對於父view的Left位置;引數t表示相對於父view的Top位置;引數r表示相對於父view的Right位置;引數b表示相對於父view的Bottom位置。.
5,解析View.MeasureSpec類
android.view.View.MeasureSpec
MeasureSpec物件,封裝了layout規格說明,並且從父view傳遞給子view。每個MeasureSpec物件代表了width或height的規格。
MeasureSpec物件包含一個size和一個mode,其中mode可以取以下三個數值之一:
UNSPECIFIED,1073741824 [0x40000000],未加規定的,表示沒有給子view新增任何規定。
EXACTLY,0 [0x0],精確的,表示父view為子view確定精確的尺寸。
第三步,MainActivity.java:
1,在方法onMeasure中呼叫setMeasuredDimension方法
void android.view.View.setMeasuredDimension(int measuredWidth, int measuredHeight)
在onMeasure(int, int)中,必須呼叫setMeasuredDimension(int width, int height)來儲存測量得到的寬度和高度值,如果沒有這麼去做會觸發異常IllegalStateException。
2,在方法onMeasure中呼叫孩子的measure方法
void android.view.View.measure(int widthMeasureSpec, int heightMeasureSpec)
這個方法用來測量出view的大小。父view使用width引數和height引數來提供constraint資訊。實際上,view的測量工作在onMeasure(int, int)方法中完成。因此,只有onMeasure(int, int)方法可以且必須被重寫。引數widthMeasureSpec提供view的水平空間的規格說明,引數heightMeasureSpec提供view的垂直空間的規格說明。
3,解析onMeasure(int, int)方法
void android.view.View.onMeasure(int widthMeasureSpec, int heightMeasureSpec)
測量view及其內容來確定view的寬度和高度。這個方法在measure(int, int)中被呼叫,必須被重寫來精確和有效的測量view的內容。
在重寫這個方法時,必須呼叫setMeasuredDimension(int, int)來儲存測量得到的寬度和高度值。執行失敗會觸發一個IllegalStateException異常。呼叫父view的onMeasure(int, int)是合法有效的用法。
view的基本測量資料預設取其背景尺寸,除非允許更大的尺寸。子view必須重寫onMeasure(int, int)來提供其內容更加準確的測量數值。如果被重寫,子類確保測量的height和width至少是view的最小高度和寬度(通過getSuggestedMinimumHeight()和getSuggestedMinimumWidth()獲取)。
4,解析onLayout(boolean, int, int, int, int)方法
void android.view.ViewGroup.onLayout(boolean changed, int l, int t, int r, int b)
呼叫場景:在view給其孩子設定尺寸和位置時被呼叫。子view,包括孩子在內,必須重寫onLayout(boolean, int, int, int, int)方法,並且呼叫各自的layout(int, int, int, int)方法。
引數說明:引數changed表示view有新的尺寸或位置;引數l表示相對於父view的Left位置;引數t表示相對於父view的Top位置;引數r表示相對於父view的Right位置;引數b表示相對於父view的Bottom位置。.
5,解析View.MeasureSpec類
android.view.View.MeasureSpec
MeasureSpec物件,封裝了layout規格說明,並且從父view傳遞給子view。每個MeasureSpec物件代表了width或height的規格。
MeasureSpec物件包含一個size和一個mode,其中mode可以取以下三個數值之一:
UNSPECIFIED,1073741824 [0x40000000],未加規定的,表示沒有給子view新增任何規定。
EXACTLY,0 [0x0],精確的,表示父view為子view確定精確的尺寸。
AT_MOST,-2147483648 [0x80000000],子view可以在指定的尺寸內儘量大。
在這裡給大家舉一個例子demo:
第一步:自定義一個View實現ViewGroup介面,即自定義ViewGroup:
第二步,佈局檔案:package net.loonggg.viewgroup; import android.content.Context; import android.util.AttributeSet; import android.view.View; import android.view.ViewGroup; public class MyViewGroup extends ViewGroup { public MyViewGroup(Context context) { super(context); } public MyViewGroup(Context context, AttributeSet attrs) { super(context, attrs); } public MyViewGroup(Context context, AttributeSet attrs, int defStyle) { super(context, attrs, defStyle); } /** * 計算控制元件的大小 */ @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { super.onMeasure(widthMeasureSpec, heightMeasureSpec); int measureWidth = measureWidth(widthMeasureSpec); int measureHeight = measureHeight(heightMeasureSpec); // 計算自定義的ViewGroup中所有子控制元件的大小 measureChildren(widthMeasureSpec, heightMeasureSpec); // 設定自定義的控制元件MyViewGroup的大小 setMeasuredDimension(measureWidth, measureHeight); } private int measureWidth(int pWidthMeasureSpec) { int result = 0; int widthMode = MeasureSpec.getMode(pWidthMeasureSpec);// 得到模式 int widthSize = MeasureSpec.getSize(pWidthMeasureSpec);// 得到尺寸 switch (widthMode) { /** * mode共有三種情況,取值分別為MeasureSpec.UNSPECIFIED, MeasureSpec.EXACTLY, * MeasureSpec.AT_MOST。 * * * MeasureSpec.EXACTLY是精確尺寸, * 當我們將控制元件的layout_width或layout_height指定為具體數值時如andorid * :layout_width="50dip",或者為FILL_PARENT是,都是控制元件大小已經確定的情況,都是精確尺寸。 * * * MeasureSpec.AT_MOST是最大尺寸, * 當控制元件的layout_width或layout_height指定為WRAP_CONTENT時 * ,控制元件大小一般隨著控制元件的子空間或內容進行變化,此時控制元件尺寸只要不超過父控制元件允許的最大尺寸即可 * 。因此,此時的mode是AT_MOST,size給出了父控制元件允許的最大尺寸。 * * * MeasureSpec.UNSPECIFIED是未指定尺寸,這種情況不多,一般都是父控制元件是AdapterView, * 通過measure方法傳入的模式。 */ case MeasureSpec.AT_MOST: case MeasureSpec.EXACTLY: result = widthSize; break; } return result; } private int measureHeight(int pHeightMeasureSpec) { int result = 0; int heightMode = MeasureSpec.getMode(pHeightMeasureSpec); int heightSize = MeasureSpec.getSize(pHeightMeasureSpec); switch (heightMode) { case MeasureSpec.AT_MOST: case MeasureSpec.EXACTLY: result = heightSize; break; } return result; } /** * 覆寫onLayout,其目的是為了指定檢視的顯示位置,方法執行的前後順序是在onMeasure之後,因為檢視肯定是隻有知道大小的情況下, * 才能確定怎麼擺放 */ @Override protected void onLayout(boolean changed, int l, int t, int r, int b) { // 記錄總高度 int mTotalHeight = 0; // 遍歷所有子檢視 int childCount = getChildCount(); for (int i = 0; i < childCount; i++) { View childView = getChildAt(i); // 獲取在onMeasure中計算的檢視尺寸 int measureHeight = childView.getMeasuredHeight(); int measuredWidth = childView.getMeasuredWidth(); childView.layout(l, mTotalHeight, measuredWidth, mTotalHeight + measureHeight); mTotalHeight += measureHeight; } } }
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" android:background="#00f0f0" tools:context=".MainActivity" > <net.loonggg.viewgroup.MyViewGroup android:id="@+id/myViewGroup" android:layout_width="480dp" android:layout_height="300dp" android:background="#0f0f0f" > <TextView android:layout_width="200dp" android:layout_height="100dp" android:background="#000000" android:gravity="center" android:text="第一個TextView" /> <TextView android:layout_width="100dp" android:layout_height="200dp" android:background="#ffffff" android:gravity="center" android:text="第二個TextView" /> </net.loonggg.viewgroup.MyViewGroup> </RelativeLayout>
第三步,MainActivity.java:
package net.loonggg.viewgroup;
import android.os.Bundle;
import android.app.Activity;
public class MainActivity extends Activity {
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
}
}
ok,你們大家懂了嗎?有問題請留言。