1. 程式人生 > >Centos&Redhat下bcm43142博通無線網絡卡linux驅動之二

Centos&Redhat下bcm43142博通無線網絡卡linux驅動之二

上次通過更換核心實現成功編譯驅動無線網絡卡,但是啟動到系統原核心下依然沒有bcm43142的驅動,遂準備在原核心下編譯驅動,記錄一下 ps:更推薦這種方法,避免因更換核心出現其他相容性問題 1.準備驅動包 hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz 點我下載 密cmet 下載拷貝進u盤,將原始碼包拷貝至/usr 2.安裝工具 安裝gccyum install -y gcc,如已安裝可跳過 安裝核心對應版本的kernel-headers,kerner-devel,本次使用當前系統映象作為yum源,所以版本也是一致的 [[email protected] ~]# yum list|grep kernel kernel.x86_64 3.10.0-327.el7 @anaconda/7.2 kernel-devel.x86_64 3.10.0-327.el7 @rhel7.2_iso kernel-headers.x86_64 3.10.0-327.el7 @rhel7.2_iso 3.編譯原始碼與安裝驅動 複製原始碼包並解壓 [[email protected] ~]# mkdir -p /usr/local/other/wireless7_2 [[email protected] ~]# cp /usr/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz /usr/local/other/wireless7_2 [
[email protected]
~]# cd /usr/local/other/wireless7_2 [[email protected] wireless7_2]# tar zxf hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz [[email protected] wireless7_2]# ls hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz lib Makefile src 編譯 [[email protected] wireless7_2]# make KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` make: *** /lib/modules/3.10.0-327.el7.x86_64/build: No such file or directory. Stop. make: *** [all] Error 2 報錯,分析錯誤原因,發現/lib/modules/3.10.0-327.el7.x86_64/build軟連結失效,重做之 ln -s /usr/src/kernels/3.10.0-327.el7.x86_64/ /lib/modules/3.10.0-327.el7.x86_64/build #注意做軟連結要寫絕對路徑 重新編譯 [
[email protected]
wireless7_2]# make clean && make KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` clean make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64' CFG80211 API is prefered for this kernel version /usr/local/other/wireless7_2/Makefile:85: Neither CFG80211 nor Wireless Extension is enabled in kernel CLEAN /usr/local/other/wireless7_2/.tmp_versions CLEAN /usr/local/other/wireless7_2/Module.symvers make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64' KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64' CFG80211 API is prefered for this kernel version Using CFG80211 API LD /usr/local/other/wireless7_2/built-in.o CC [M] /usr/local/other/wireless7_2/src/shared/linux_osl.o CC [M] /usr/local/other/wireless7_2/src/wl/sys/wl_linux.o CC [M] /usr/local/other/wireless7_2/src/wl/sys/wl_iw.o CC [M] /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.o /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_station’: /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1460:20: error: ‘STATION_INFO_TX_BITRATE’ undeclared (first use in this function) sinfo->filled |= STATION_INFO_TX_BITRATE; ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1460:20: note: each undeclared identifier is reported only once for each function it appears in /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1477:20: error: ‘STATION_INFO_SIGNAL’ undeclared (first use in this function) sinfo->filled |= STATION_INFO_SIGNAL; ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: At top level: /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: initialization from incompatible pointer type [enabled by default] .get_station = wl_cfg80211_get_station, ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: (near initialization for ‘wl_cfg80211_ops.get_station’) [enabled by default] /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_alloc_wdev’: /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1894:22: error: incompatible types when assigning to type ‘const struct wiphy_wowlan_support *’ from type ‘struct wiphy_wowlan_support’ wdev->wiphy->wowlan = wl_wowlan_support; ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_inform_single_bss’: /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: error: incompatible type for argument 3 of ‘cfg80211_inform_bss’ (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL); ^ In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0: include/net/cfg80211.h:4029:1: note: expected ‘enum cfg80211_bss_frame_type’ but argument is of type ‘const u8 *’ cfg80211_inform_bss(struct wiphy *wiphy, ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: warning: passing argument 7 of ‘cfg80211_inform_bss’ makes integer from pointer without a cast [enabled by default] (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL); ^ In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0: include/net/cfg80211.h:4029:1: note: expected ‘u16’ but argument is of type ‘const u8 *’ cfg80211_inform_bss(struct wiphy *wiphy, ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: warning: passing argument 8 of ‘cfg80211_inform_bss’ makes pointer from integer without a cast [enabled by default] (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL); ^ In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0: include/net/cfg80211.h:4029:1: note: expected ‘const u8 *’ but argument is of type ‘size_t’ cfg80211_inform_bss(struct wiphy *wiphy, ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: error: too few arguments to function ‘cfg80211_inform_bss’ (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL); ^ In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0: include/net/cfg80211.h:4029:1: note: declared here cfg80211_inform_bss(struct wiphy *wiphy, ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_notify_connect_status’: /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2124:4: warning: passing argument 3 of ‘cfg80211_ibss_joined’ makes pointer from integer without a cast [enabled by default] cfg80211_ibss_joined(ndev, (u8 *)&wl->bssid, GFP_KERNEL); ^ In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0: include/net/cfg80211.h:4219:6: note: expected ‘struct ieee80211_channel *’ but argument is of type ‘unsigned int’ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2124:4: error: too few arguments to function ‘cfg80211_ibss_joined’ cfg80211_ibss_joined(ndev, (u8 *)&wl->bssid, GFP_KERNEL); ^ In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0: include/net/cfg80211.h:4219:6: note: declared here void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, ^ make[2]: *** [/usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.o] Error 1 make[1]: *** [_module_/usr/local/other/wireless7_2] Error 2 make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64' make: *** [all] Error 2 發現報錯,依次排錯 由報錯資訊知wl_cfg80211_hybrid.c檔案第1460,1477,1894,2037,2124行有錯,做出如下更改 [
[email protected]
wireless7_2]# vim src/wl/sys/wl_cfg80211_hybrid.c 1460 // sinfo->filled |= STATION_INFO_TX_BITRATE; 1477 // sinfo->filled |= STATION_INFO_SIGNAL; 1894 wdev->wiphy->wowlan = &wl_wowlan_support; 2035 cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN, (const u8 *)(bi->BSSID.octet), 2036 0, beacon_proberesp->capab_info, beacon_proberesp->beacon_int, 2037 (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL); 2124 cfg80211_ibss_joined(ndev, (u8 *)&wl->bssid, &wl->conf->channel, GFP_KERNEL); tips:vim裡按冒號輸入set nu顯示行號,冒號後接行號定位到該行 重新編譯 [[email protected] wireless7_2]# make clean && make KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` clean make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64' CFG80211 API is prefered for this kernel version /usr/local/other/wireless7_2/Makefile:85: Neither CFG80211 nor Wireless Extension is enabled in kernel CLEAN /usr/local/other/wireless7_2/.tmp_versions CLEAN /usr/local/other/wireless7_2/Module.symvers make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64' KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64' CFG80211 API is prefered for this kernel version Using CFG80211 API LD /usr/local/other/wireless7_2/built-in.o CC [M] /usr/local/other/wireless7_2/src/shared/linux_osl.o CC [M] /usr/local/other/wireless7_2/src/wl/sys/wl_linux.o CC [M] /usr/local/other/wireless7_2/src/wl/sys/wl_iw.o CC [M] /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.o /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: initialization from incompatible pointer type [enabled by default] .get_station = wl_cfg80211_get_station, ^ /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: (near initialization for ‘wl_cfg80211_ops.get_station’) [enabled by default] LD [M] /usr/local/other/wireless7_2/wl.o Building modules, stage 2. CFG80211 API is prefered for this kernel version Using CFG80211 API MODPOST 1 modules CC /usr/local/other/wireless7_2/wl.mod.o LD [M] /usr/local/other/wireless7_2/wl.ko make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64' 沒有報錯 [[email protected] wireless7_2]# ls built-in.o modules.order wl.mod.c hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz Module.symvers wl.mod.o lib src wl.o Makefile wl.ko 發現已生成驅動檔案wl.ko 安裝驅動檔案 [[email protected] wireless7_2]# make install install -D -m 755 wl.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless 4.驅動檔案載入和配置 載入驅動檔案 [[email protected] wireless7_2]# insmod wl.ko [[email protected] wireless7_2]# lsmod|grep wl wl 6445574 0 cfg80211 572836 1 wl 發現右上角出現wifi選項,驅動載入成功,可以連線wifi啦,Enjoying it! 參考 1 2 http://blog.51cto.com/kking/2096757