jni 中使用NewStringUTF時報錯:input is not valid Modified UTF-8: illegal start byte 0xa0
阿新 • • 發佈:2019-01-02
static u1 checkUtfBytes(const char* bytes, const char** errorKind) {
while (*bytes != '\0') {
u1 utf8 = *(bytes++);
// Switch on the high four bits.
switch (utf8 >> 4) {
case 0x00:
case 0x01:
case 0x02:
case 0x03:
case 0x04:
case 0x05:
case 0x06:
case 0x07:
// Bit pattern 0xxx. No need for any extra bytes.
break;
case 0x08:
case 0x09:
case 0x0a:
case 0x0b:
case 0x0f:
/*
* Bit pattern 10xx or 1111, which are illegal start bytes.
* Note: 1111 is valid for normal UTF-8, but not the
* modified UTF-8 used here.
*/
*errorKind = "start";
return utf8;
case 0x0e:
// Bit pattern 1110, so there are two additional bytes.
utf8 = *(bytes++);
if ((utf8 & 0xc0) != 0x80) {
*errorKind = "continuation";
return utf8;
}
// Fall through to take care of the final byte.
case 0x0c:
case 0x0d:
// Bit pattern 110x, so there is one additional byte.
utf8 = *(bytes++);
if ((utf8 & 0xc0) != 0x80) {
*errorKind = "continuation";
return utf8;
}
break;
}
}
return 0;
}
while (*bytes != '\0') {
u1 utf8 = *(bytes++);
// Switch on the high four bits.
switch (utf8 >> 4) {
case 0x00:
case 0x01:
case 0x02:
case 0x03:
case 0x04:
case 0x05:
case 0x06:
case 0x07:
// Bit pattern 0xxx. No need for any extra bytes.
break;
case 0x08:
case 0x09:
case 0x0a:
case 0x0b:
case 0x0f:
/*
* Bit pattern 10xx or 1111, which are illegal start bytes.
* Note: 1111 is valid for normal UTF-8, but not the
* modified UTF-8 used here.
*/
*errorKind = "start";
return utf8;
case 0x0e:
// Bit pattern 1110, so there are two additional bytes.
utf8 = *(bytes++);
if ((utf8 & 0xc0) != 0x80) {
*errorKind = "continuation";
return utf8;
}
// Fall through to take care of the final byte.
case 0x0c:
case 0x0d:
// Bit pattern 110x, so there is one additional byte.
utf8 = *(bytes++);
if ((utf8 & 0xc0) != 0x80) {
*errorKind = "continuation";
return utf8;
}
break;
}
}
return 0;
}