IOS Ble藍芽開發實現
阿新 • • 發佈:2018-12-25
1.本篇博文闡述如何開發Ble藍芽。在藍芽中的一些常見服務,掃描,以及連結;
- 主藍芽類檔案.h
- 主藍芽類檔案.m
- UUID檔案
- 藍芽列表展示的檔案
一:引入Ble藍芽的框架<CoreBluetooth/CoreBluetooth.h>
BuleHelp.h
#import <Foundation/Foundation.h> //匯入藍芽框架 #import <CoreBluetooth/CoreBluetooth.h> #import "DeviceModel.h" #import "Constants.h" #import "CommonUserDefaults.h" #import "CommonUtil.h" #import "TempDB.h" #define COMMAND_PACKET_MIN_SIZE 7 @interface BlueHelp : NSObject //藍芽的裝置搜尋顯示在列表中 @property (nonatomic, strong) NSMutableArray <CBPeripheral*>*periperals; //連線peripheral @property(nonatomic,strong) CBPeripheral *peripheral; //連線peripheral @property(nonatomic,strong) CBPeripheral *selectperipheral; //中心管理者 @property (nonatomic, strong) CBCentralManager *centerManager; @property (nonatomic,strong) DeviceModel *deviceModel; //裝置列表 @property (nonatomic,strong) NSMutableArray *deviceList; @property (nonatomic,strong) NSMutableArray *commandArray; //是否進行ota升級 @property (nonatomic) BOOL isOta; @property (nonatomic) BOOL isWritePacketDataSuccess; @property (strong,nonatomic) NSString * checkSumType; /*! * @property isApplicationValid * * @discussion flag used to check whether the application writing is success * */ @property (nonatomic) BOOL isApplicationValid; /*! * @property checkSum * * @discussion checkSum received from the device for writing a single row * */ @property (assign) uint8_t checkSum; /*! * @property startRowNumber * * @discussion Device flash start row number * */ @property (nonatomic) int startRowNumber; /*! * @property endRowNumber * * @discussion Device flash end row number * */ @property (nonatomic) int endRowNumber; /*! * @property siliconIDString * * @discussion siliconID from the device response * */ @property (strong,nonatomic) NSString *siliconIDString; /*! * @property siliconRevString * * @discussion silicon rev from the device response * */ @property (strong,nonatomic) NSString *siliconRevString; //是否傳送資料 @property (nonatomic) BOOL isSendData; @property (strong,nonatomic) CommonUtil *commonUtil; @property (strong,nonatomic) TempDB *tempDB; @property (strong,nonatomic) NSDate *currentDate; //時間格式化 @property(strong,nonatomic) NSDateFormatter *dateformatter; @property(strong,nonatomic) NSString *deviceName; //@property (nonatomic,strong) NSUserDefaults *userDefaults; @property (nonatomic,strong) CommonUserDefaults *userDefaults; //傳送溫度資料 @property (nonatomic,strong) CBCharacteristic *sendtempcharateristic; //傳送OTA資料 @property (nonatomic,strong) CBCharacteristic *sendotacharateristic; //高/低溫度資料 //@property (nonatomic,strong) CBCharacteristic *sendhighalarmcharateristic; // //@property (nonatomic,strong) CBCharacteristic *sendlowalarmcharateristic; //ota @property (nonatomic,strong) CBCharacteristic *senddfucharateristic; //傳送字串'CR'清除機子上的最大值(3個位元組) @property (nonatomic,strong) CBCharacteristic *senddcrstrateristic; //傳送字串'PD'機子關機(3個位元組) @property (nonatomic,strong) CBCharacteristic *senddoutstrateristic; //靜音 @property (strong,nonatomic) CBCharacteristic *sendmutealarmcharateristic; //calset @property(strong,nonatomic) CBCharacteristic *sendcalsetcharateristic; //intervaltime @property(strong,nonatomic) CBCharacteristic *sendintervaltimecharateristic; //alarmswitch @property(strong,nonatomic) CBCharacteristic *sendalarmswitchcharateristic; //tempunit @property(strong,nonatomic) CBCharacteristic *sendtempunitcharateristic; @property(strong,nonatomic) CBCharacteristic *sendlowalarmswitchcharateristic; ///<===============方法區塊=======================> + (id)sharedManager; -(NSMutableArray *)getDeviceList; -(NSMutableArray *)getPeriperalList; -(void)startScan; //連線藍芽 -(void)contentBlue:(int) row; //斷開藍芽 -(void)disContentBle; //斷開ota的藍芽連線 -(void)disContentOtaBle; //溫度符號 -(void)writeTempUnit:(NSString *)value; //寫入報警開關 -(void)writeAlarmSwitch:(NSString *)value; //寫入mute alarm -(void)writeMuteAlarm:(NSString *)value; //寫入CR CLERVULE -(void)writeClearCR:(NSString *)value; //寫入interval time -(void)writeIntervalTime:(NSString *)value; //寫入cal set -(void)writeCalSet:(NSString *)value; //寫入裝置的開關按鈕 -(void)writeBluePD:(NSString *)value; //寫入低溫報警 //-(void)writeLowAlarm:(NSString *)value; // ////寫入高溫報警 //-(void)writeHighAlarm:(NSString *)value; //OTA韌體升級 又稱為DFU -(void)writeUpdateOTA:(NSString*)value; -(void)writeBlueOTA:(NSString *)value; -(void)wirteBlueOTAData:(NSData *)value; -(void)writeLowAlarmSwitch:(NSString *)value; -(void) discoverCharacteristicsWithCompletionHandler:(void (^) (BOOL success, NSError *error)) handler; -(void)updateValueForCharacteristicWithCompletionHandler:(void (^) (BOOL success,id command,NSError *error)) handler; -(void) stopUpdate; -(void) setCheckSumType:(NSString *) type; -(NSData *) createCommandPacketWithCommand:(uint8_t)commandCode dataLength:(unsigned short)dataLength data:(NSDictionary *)packetDataDictionary; -(void) writeValueToCharacteristicWithData:(NSData *)data bootLoaderCommandCode:(unsigned short)commandCode; /* * 停止掃描 */ -(void)stopScan; //是否是第一次連線裝置 @property(assign,nonatomic) BOOL isconnected; //當前的時間 @property(nonatomic,assign) long currentTime; @property(nonatomic,strong) NSString *macAddre; @property(nonatomic,strong) NSString *macName; -(void)disMainOtaBle; @end
BuleHelp.m
//程式執行後,會自動呼叫的檢查藍芽的方法 並掃描藍芽的方法 - (void)centralManagerDidUpdateState:(CBCentralManager *)central{ if ([central state] == CBCentralManagerStatePoweredOff) { NSLog(@"CoreBluetooth BLE hardware is powered off"); } else if ([central state] == CBCentralManagerStatePoweredOn) { NSLog(@"CoreBluetooth BLE hardware is powered on and ready"); [self startScan]; } else if ([central state] == CBCentralManagerStateUnauthorized) { NSLog(@"CoreBluetooth BLE state is unauthorized"); } else if ([central state] == CBCentralManagerStateUnknown) { NSLog(@"CoreBluetooth BLE state is unknown"); } else if ([central state] == CBCentralManagerStateUnsupported) { NSLog(@"CoreBluetooth BLE hardware is unsupported on this platform"); } }
/*
* 程式執行的時候開始掃描
*/
-(void)startScan{
_periperals = [[NSMutableArray alloc] init];
_deviceList = [[NSMutableArray alloc] init];
//2.利用中心裝置掃描外部裝置
[_centerManager scanForPeripheralsWithServices:nil options:nil];
}
/*
* 停止掃描
*/
-(void)stopScan{
[_centerManager stopScan];
}
/* * 裝置中可以包含 Device addre地址 放在 key:kCBAdvDataManufacturerData中既可以得到 * 1.硬體開發工程師 把地址寫入到裝置的廠家資訊中。 */ - (void)centralManager:(CBCentralManager *)central didDiscoverPeripheral:(CBPeripheral *)peripheral advertisementData:(NSDictionary<NSString *,id> *)advertisementData RSSI:(NSNumber *)RSS{ //判斷如果陣列中不包含當前掃描到的外部裝置才儲存 if (![_periperals containsObject:peripheral]){ //包扣3種裝置 都需要去搜索 if([peripheral.name containsString:@"TMW012BT"]||[peripheral.name containsString:@"OTA"]){ NSLog(@"DATA: %@", advertisementData); NSArray *keys = [advertisementData allKeys]; for (int i = 0; i < [keys count]; ++i) { id key = [keys objectAtIndex: i]; NSString *keyName = (NSString *) key; NSData *value = [advertisementData objectForKey: key]; if([keyName isEqualToString:@"kCBAdvDataManufacturerData"]){ NSLog(@"value is %@",value); NSString *result = [self convertDataToHexStr:value]; NSLog(@"reslut is %@",result); if(result!=nil&&result.length>4){ NSString *d = [result substringFromIndex:4]; NSLog(@"D IS %@",d); // 小寫 //NSString *lower = [test lowercaseString]; // 大寫 NSString *upper = [d uppercaseString]; _macAddre = [NSString stringWithFormat:@"S/N:%@",upper]; } } if([keyName isEqualToString:@"kCBAdvDataLocalName"]){ NSString *aStr= (NSString*)value; NSLog(@"astr is %@",aStr); _macName = aStr; } } _deviceModel = [DeviceModel new]; _deviceModel.deviceName = _macName; //藍芽地址 _deviceModel.deviceAddre = _macAddre; int rssi = [RSS intValue]; NSString *range = [NSString stringWithFormat:@"%d",rssi]; NSString *rs = [NSString stringWithFormat:@"RSSI %@dBm",range]; //新增到裡面 [self.periperals addObject:peripheral]; _deviceModel.deviceRssi = rs; [_deviceList addObject:_deviceModel]; } } }
//解析廣播裡面的資料
-(void)getAdvertisementData:(NSDictionary<NSString *,id> *) advertisementData{
NSArray *keys = [advertisementData allKeys];
for (int i = 0; i < [keys count]; ++i) {
id key = [keys objectAtIndex: i];
NSString *keyName = (NSString *) key;
NSObject *value = [advertisementData objectForKey: key];
if([keyName isEqualToString:@"kCBAdvDataManufacturerData"]){
printf(" key: %s\n", [keyName cStringUsingEncoding: NSUTF8StringEncoding]);
NSString *values = (NSString *) value;
NSLog(@"values is %@",values);
}
}
}
/*
* 連線藍芽裝置給外部呼叫的方法
* 傳入的是相對應的行數
*/
-(void)contentBlue:(int) row{
[_centerManager connectPeripheral:_periperals[row] options:nil];
}
-(void)disContentBle{
//關鍵的斷開藍芽 通知也要停止掉
if((_peripheral!=nil && _sendtempcharateristic!=nil)){
[_peripheral setNotifyValue:NO forCharacteristic:_sendtempcharateristic];
[self disconnectPeripheral:_peripheral];
}
}
/*
* 斷開ota的 連線
*/
-(void)disContentOtaBle{
if(_peripheral!=nil && _sendotacharateristic!=nil){
[_peripheral setNotifyValue:NO forCharacteristic:_sendotacharateristic];
[self disconnectPeripheral:_peripheral];
}
}
-(void)disMainOtaBle{
if(_peripheral!=nil){
[self disconnectPeripheral:_peripheral];
}
}
- (void) disconnectPeripheral:(CBPeripheral*)peripheral
{
[_centerManager cancelPeripheralConnection:peripheral];
}
//連線成功
- (void)centralManager:(CBCentralManager *)central didConnectPeripheral:(CBPeripheral *)peripheral{
NSLog(@"連線成功");
if(peripheral!=nil){
//停止掃描 這個用於自動連線的時候
[_centerManager stopScan];
//裝置名稱
_deviceName = peripheral.name;
_selectperipheral = peripheral;
peripheral.delegate = self;
//再去掃描服務
[peripheral discoverServices:nil];
}
}
//連線失敗
- (void)centralManager:(CBCentralManager *)central didFailToConnectPeripheral:(CBPeripheral *)peripheral error:(nullable NSError *)error{
NSLog(@"連線失敗,失敗原因:%@",error);
NSString *disContentBlue = @"discontentblue";
NSDictionary *blueDiscontent = [NSDictionary dictionaryWithObject:disContentBlue forKey:@"disconnect"];
//傳送廣播 連線失敗
[[NSNotificationCenter defaultCenter] postNotificationName:@"disNofiction" object:nil userInfo:blueDiscontent];
}
//斷開連線
- (void)centralManager:(CBCentralManager *)central didDisconnectPeripheral:(CBPeripheral *)peripheral error:(NSError *)error{
NSLog(@"斷開連線");
NSString *disContentBlue = @"discontentblue";
//_blueiscon = @"Disconnect";
NSDictionary *blueDiscontent = [NSDictionary dictionaryWithObject:disContentBlue forKey:@"disconnect"];
//傳送廣播 連線失敗
[[NSNotificationCenter defaultCenter] postNotificationName:@"disNofiction" object:nil userInfo:blueDiscontent];
}
//只要掃描到服務就會呼叫,其中的外設就是服務所在的外設
- (void)peripheral:(CBPeripheral *)peripheral didDiscoverServices:(NSError *)error{
if (error){
NSLog(@"掃描服務出現錯誤,錯誤原因:%@",error);
}else{
//獲取外設中所掃描到的服務
for (CBService *service in peripheral.services){
//拿到需要掃描的服務,例如FFF0 比如列印溫度資料
//把所有的service打印出來
//從需要的服務中查詢需要的特徵
//從peripheral的services中掃描特徵
[peripheral discoverCharacteristics:nil forService:service];
}
}
}
//只要掃描到特徵就會呼叫,其中的外設和服務就是特徵所在的外設和服務
- (void)peripheral:(CBPeripheral *)peripheral didDiscoverCharacteristicsForService:(nonnull CBService *)service error:(nullable NSError *)error{
if(error){
NSLog(@"掃描特徵出現錯誤,錯誤原因:%@",error);
}else{
//遍歷特徵,拿到需要的特徵進行處理
for (CBCharacteristic *characteristic in service.characteristics){
NSLog(@"characteristic is %@",characteristic.UUID);
//如果是溫度資料處理
if([characteristic.UUID isEqual:BOOT_TEMPVALUE_UUID]){
//將全部的特徵資訊打印出來
_isconnected = true;
_peripheral = peripheral;
_sendtempcharateristic = characteristic;
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
}
//如果是ota進行ota升級
else if([characteristic.UUID isEqual:BOOT_OTA_WIRTE_UUID]){
_peripheral = peripheral;
_sendotacharateristic = characteristic;
//設定通知
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
_isOta = TRUE;
[_userDefaults saveOta:_isOta];
//[_ setBool:_isOta forKey:@"isOTA"];
NSString *s = @"OTA";
NSDictionary *tempOta = [NSDictionary dictionaryWithObject:s forKey:@"ota"];
[[NSNotificationCenter defaultCenter] postNotificationName:@"tempOTA" object:nil userInfo:tempOta];
}
//CAL
else if([characteristic.UUID isEqual:BOOT_CAL_UUID]){
_sendcalsetcharateristic = characteristic;
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
}
//interval time
else if([characteristic.UUID isEqual:BOOT_INTERVALTIME_UUID]){
_sendintervaltimecharateristic = characteristic;
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
}
//Tempunit
else if([characteristic.UUID isEqual:BOOT_TEMPUNIT_UUID]){
_sendtempunitcharateristic = characteristic;
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
}
//DFU
else if([characteristic.UUID isEqual:BOOT_DFU_UUID]){
_senddfucharateristic = characteristic;
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
}
//傳送字串'CR'清除機子上的最大值(3個位元組)
else if([characteristic.UUID isEqual:BOOT_CRSTRING_UUID]){
_senddcrstrateristic = characteristic;
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
}
//傳送字串'PD'機子關機(3個位元組)
else if([characteristic.UUID isEqual:BOOT_OUTSTRING_UUID]){
_senddoutstrateristic = characteristic;
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
}
else{
}
}
}
}
/*
設定通知
*/
-(void)notifyCharacteristic:(CBPeripheral *)peripheral
characteristic:(CBCharacteristic *)characteristic{
[peripheral setNotifyValue:YES forCharacteristic:characteristic];
[_centerManager stopScan];
}
/*
取消通知
*/
-(void)cancelNotifyCharacteristic:(CBPeripheral *)peripheral
characteristic:(CBCharacteristic *)characteristic{
[peripheral setNotifyValue:NO forCharacteristic:characteristic];
}
/*
接收資料解析
*/
- (void)peripheral:(CBPeripheral *)peripheral didUpdateValueForCharacteristic:(CBCharacteristic *)characteristic error:(NSError *)error{
//是否為Ota
if(!self.isSendOta){
if(self.readtempcharater == characteristic){
NSString *tmpData = [self.cmUtil getTempTMWData:characteristic];
if(tmpData!=nil){
//開始處理資料
NSArray *data = [tmpData componentsSeparatedByString:@","];
TmpModel *tp = [[TmpModel alloc] init];
tp.tmp = data[0];
tp.max = data[1];
tp.unit = data[2];
//電量
tp.bat = data[3];
NSDictionary *tempDict = [NSDictionary dictionaryWithObject:tp forKey:@"tempData"];
[[NSNotificationCenter defaultCenter] postNotificationName:@"tempNofiction" object:nil userInfo:tempDict];
if([tp.bat isEqual:@"1"]){
//低電量廣播
NSDictionary *LowDict = [NSDictionary dictionaryWithObject:tp forKey:@"lowData"];
[[NSNotificationCenter defaultCenter] postNotificationName:@"lowNofiction" object:nil userInfo:LowDict];
}
}
}
}
//======================寫入資料區塊========================//
/*
寫入傳送時間
*/
-(void)writeIntervalTime:(NSString *)value periperalData:(CBPeripheral*)periperal{
if(value!=nil&&periperal!=nil&&self.sendtimecharater!=nil){
[self writeData:value forCharacteristic:self.sendtimecharater periperalData:periperal];
}
}
/*
寫入溫度單位
*/
-(void)writeTmpUnit:(NSString*)value periperalData:(CBPeripheral*)periperal{
if(value!=nil&&periperal!=nil&&self.sendunitcharater!=nil){
[self writeData:value forCharacteristic:self.sendunitcharater periperalData:periperal];
}
}
/*
寫入Cal值
*/
-(void)writeCalValue:(NSString *)value periperalData:(CBPeripheral*)periperal{
if(value!=nil&&periperal!=nil&&self.sendcalcharater!=nil){
[self writeData:value forCharacteristic:self.sendcalcharater periperalData:periperal];
}
}
/*
傳送Ota使得裝置進入Ota
*/
-(void)writeDfuValue:(NSString *)value periperalData:(CBPeripheral*)periperal{
if(value!=nil&&periperal!=nil&&self.senddfucharater!=nil){
[self writeData:value forCharacteristic:self.senddfucharater periperalData:periperal];
}
}
/*
傳送Max Temp實現清零選項
*/
-(void)writeClearValue:(NSString *)value periperalData:(CBPeripheral*)periperal{
if(value!=nil&&periperal!=nil&&self.sendclearcharater!=nil){
[self writeData:value forCharacteristic:self.sendclearcharater periperalData:periperal];
}
}
/*
傳送關機選項實現遠端開關機
*/
-(void)writeCloseValue:(NSString *)value periperalData:(CBPeripheral*)periperal{
if(value!=nil&&periperal!=nil&&self.sendclosecharater!=nil){
[self writeData:value forCharacteristic:self.sendclosecharater periperalData:periperal];
}
}
/*
所有寫入的資料處理
*/
-(void)writeData:(NSString *)value forCharacteristic:(CBCharacteristic *)characteristic periperalData:(CBPeripheral*)periperal{
NSData *data = [value dataUsingEncoding:NSUTF8StringEncoding];
if(characteristic.properties & CBCharacteristicPropertyWriteWithoutResponse)
{
[periperal writeValue:data forCharacteristic:characteristic type:CBCharacteristicWriteWithoutResponse];
}else
{
[periperal writeValue:data forCharacteristic:characteristic type:CBCharacteristicWriteWithResponse];
}
}
此篇文章闡述到這,基本BLE藍芽開發實現都詳細的描述了。謝謝看官的閱讀…不要忘了點贊,你的贊是博主往後繼續更新IOS系列藍芽文章的最大動力,嚶嚶嚶…