telnet: connect to address 192.168.2.140: Connection refused
解決方案
問題描述: 我的redis開啟後,使用telnet進行訪問出現如下錯誤 telnet: connect to address 192.168.2.140: Connection refused 解決方案 查看redis.conf這個配置文件,將bind 127.0.0.1修改為bind 192.168.2.140,然後再使用telnet訪問就沒有問題 說明: 當前這個問題有可能是其他原因導致,請參考更多解決方案
本文出自 “素顏” 博客,請務必保留此出處http://suyanzhu.blog.51cto.com/8050189/1944658
telnet: connect to address 192.168.2.140: Connection refused
相關推薦
telnet: connect to address 192.168.2.140: Connection refused
telnet: connect to address 192.168.2.140: connection refused解決方案問題描述: 我的redis開啟後,使用telnet進行訪問出現如下錯誤 telnet: connect to address 192.168.2.140: Conne
telnet服務開啟了,但是xshell卻遠程不上去 出現的報錯信息 Connecting to 192.168.26.135:23... Could not connect to '192.168.26.135' (port 23): Connection failed.
ble ets conn telnet iptables bsp gre top table 用netstat -ntpl |grep :23命令查看端口Telnet服務已經開啟了 在虛擬機上也能telnet得上(telnet+ip地址) 但是在xshell上卻登錄
Xshell 鏈接 Could not connect to '192.168.80.129' (port 22): Connection failed
ip地址 開機 add 5.0 could not 自啟 -s 刪除 需要 在使用Xshell鏈接虛擬機VM裏面的Linux的時候、鏈接失敗,報 Could not connect to ‘192.168.80.129‘ (port 22): Connection fai
遠端連線Mongodb,提示mongodb Unable to connect to server 192.168.0.104:27017
今日在本機上安裝好Mongodb4.0後,用127.0.0.1:27017能訪問,但是換成本機的區域網地址192.168.0.104:27017後 用MongoVUE連線提示錯誤“”mongodb Unable to connect to server 192.168.0.
Xshell 6連線CentOS 7報錯Could not connect to '192.168.122.1' (port 22): Connection failed.
我之前在網上找了各種方法,都沒有連線成功,感覺自己都要炸了。很多都是說防火牆或者橋接/net連線的問題,我研究了很久,都沒有什麼用,或許你可以試試這種方法。 解決方法:很可能是你根本沒有生成IP地址,可以試一下service network restart,就會生成一個新的IP地址,如下圖:
celery啟動異常: ERROR/MainProcess] consumer: Cannot connect to redis://192.168.1.164:6379/8: DENIED
異常如下: 進入redis的配置檔案中: redis的保護模式關閉 # By default protected mode is enabled. You should disable it only if # you are sure you want c
redis叢集:Connecting to node 127.0.0.1:7000: [ERR] Sorry, can't connect to node 192.168.1.91:7000
Connecting to node 127.0.0.1:7000: [ERR] Sorry, can't connect to node 192.168.1.91:7001 這個錯誤的話那就檢視下你6個埠是否都啟動了,沒啟動的話會報上面的錯誤
ssh 不能連線linux系統 Could not connect to '192.168.X.X'(port 22) Connection failed
centOS7配置好IP地址後,發現可以ping通,但是不能ssh遠端連線 解決辦法: 檢視防火牆:service iptables status 關閉防火牆:service iptables stop 開啟防火牆:service iptables start 發現不是防火牆的原
Linux-ssh: connect to host 192.168.1.161 port 22: Connection refused
初學者利用ssh連線主機出現:一、檢查要連線的伺服器是否有ssh服務,如果沒有 centos6 為例(均已root角色執行) 1、安裝ssh服務:yum install openssh-server 2、啟動ssh服務:service sshd start
ssh: connect to host 192.168.169 port 22: No route to host 處理方法
ssh: connect to host 192.168.169 port 22: No route to host 出現這種原因是由於防火牆設定問題,要先檢查防火牆的設定: 檢視防護牆狀態se
rsync錯誤處理-failed to connect to 192.168.xxx.xxx: Connection refused (111)
=================================================================================================== rsync:failed to connect to 192.168.xx
android 請求接口報錯 org.apache.http.conn.HttpHostConnectException: Connection to http://192.168.1.90:9090 refused
spec 接口 解決辦法 out efault intern inter 請求 nbsp No Network Security Config specified, using platform defaultI/System.out: org.apache.http.co
CentOS系統中出現錯誤--SSH:connect to host centos-py port 22: Connection refused
start 配置 下載 pan 要去 isp 執行 hostname openssh 我在第一次搭建自己的 hadoop2.2.0單節點的偽分布集成環境時遇到了此錯誤,通過思考問題和查找解決方案最終搞定了這個問題,其錯誤原因主要有以下幾種: 1)S
【高效生活】git :connect to host github.com port 22: Connection refused
【前言】 記錄一下使用git 遇到的幾個問題,有相同問題的小夥伴可以借鑑下思路。 【正文】 安裝完成後,報如上錯誤:
【git 埠拒絕解決方案】ssh: connect to host github.com port 22: Connection refused
前言 前一陣兒,在公司同步github程式碼到本地的時候,爆出了這樣的一個錯誤ssh: connect to host github.com port 22: Connection refused。根據英文可以看出,ssh埠號被拒絕了,應該是被公司的網給禁掉了
解決ssh: connect to host github.com port 22: Connection refused
問題引入 當你在Linux環境下配置好git並連結到後,你想要把本地的程式碼上傳到github中。但是當你push的時候,會出現失敗的情況。 ssh [email protected] 使用上面的命令檢視詳細錯誤資訊,得到以下結果 解決方法 然後
org.apache.solr.common.SolrException: Cannot connect to cluster at 192.168.2.220:2181: cluster not f
org.apache.solr.common.SolrException: Cannot connect to cluster at 192.168.2.220:2181: cluster not found/not ready at org.apache.solr.common.clou
failed to connect to 192.168.2.222:5555
把可能佔用 5555 的埠全部關掉 若果不行,下面的文章的方法準行: https://blog.csdn.net/qq_14972057/article/details/80803629 若果篇文章說的還不行,歡迎留言 adb tcpip 5555 adb co
Error, some other host already uses address 192.168.0.202錯誤解決方法
機器 虛擬機網卡 一個 already 局域網 使用 sysconf erro 錯誤 Error, some other host already uses address 192.168.0.202錯誤解決方法 今天配置虛擬機網卡的時候遇到錯誤:Error, so
django_Invalid HTTP_HOST header: '192.168.0.20'. You may need to add '192.168.0.20' to ALLOWED
在django啟動後,通過web訪問啟動的django 整個系統報錯: Invalid HTTP_HOST header: '192.168.0.20'. You may need to add '192.168.0.20' to ALLOWED_HOSTS. 問題