手把手帶你入門 Spring Security的具體流程
Spring Security 是 Spring 家族中的一個安全管理框架,實際上,在 Spring Boot 出現之前,Spring Security 就已經發展了多年了,但是使用的並不多,安全管理這個領域,一直是 Shiro 的天下。
相對於 Shiro,在 SSM/SSH 中整合 Spring Security 都是比較麻煩的操作,所以,Spring Security 雖然功能比 Shiro 強大,但是使用反而沒有 Shiro 多(Shiro 雖然功能沒有 Spring Security 多,但是對於大部分專案而言,Shiro 也夠用了)。
自從有了 Spring Boot 之後,Spring Boot 對於 Spring Security 提供了 自動化配置方案,可以零配置使用 Spring Security。
因此,一般來說,常見的安全管理技術棧的組合是這樣的:
- SSM + Shiro
- Spring Boot/Spring Cloud + Spring Security
注意,這只是一個推薦的組合而已,如果單純從技術上來說,無論怎麼組合,都是可以執行的。
我們來看下具體使用。
1.專案建立
在 Spring Boot 中使用 Spring Security 非常容易,引入依賴即可:
pom.xml 中的 Spring Security 依賴:
<dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-security</artifactId> </dependency>
只要加入依賴,專案的所有介面都會被自動保護起來。
2.初次體驗
我們建立一個 HelloController:
@RestController public class HelloController { @GetMapping("/hello") public String hello() { return "hello"; } }
訪問 /hello
,需要登入之後才能訪問。
當用戶從瀏覽器傳送請求訪問 /hello
介面時,服務端會返回 302
響應碼,讓客戶端重定向到 /login
頁面,使用者在 /login
頁面登入,登陸成功之後,就會自動跳轉到 /hello
介面。
另外,也可以使用 POSTMAN
POSTMAN
傳送請求時,可以將使用者資訊放在請求頭中(這樣可以避免重定向到登入頁面):
通過以上兩種不同的登入方式,可以看出,Spring Security 支援兩種不同的認證方式:
- 可以通過 form 表單來認證
- 可以通過 HttpBasic 來認證
3.使用者名稱配置
預設情況下,登入的使用者名稱是 user
,密碼則是專案啟動時隨機生成的字串,可以從啟動的控制檯日誌中看到預設密碼:
這個隨機生成的密碼,每次啟動時都會變。對登入的使用者名稱/密碼進行配置,有三種不同的方式:
- 在 application.properties 中進行配置
- 通過 Java 程式碼配置在記憶體中
- 通過 Java 從資料庫中載入
前兩種比較簡單,第三種程式碼量略大,本文就先來看看前兩種,第三種後面再單獨寫文章介紹,也可以參考我的微人事專案。
3.1 配置檔案配置使用者名稱/密碼
可以直接在 application.properties 檔案中配置使用者的基本資訊:
spring.security.user.name=javaboy spring.security.user.password=123
配置完成後,重啟專案,就可以使用這裡配置的使用者名稱/密碼登入了。
3.2 Java 配置使用者名稱/密碼
也可以在 Java 程式碼中配置使用者名稱密碼,首先需要我們建立一個 Spring Security 的配置類,整合自 WebSecurityConfigurerAdapter 類,如下:
@Configuration public class SecurityConfig extends WebSecurityConfigurerAdapter { @Override protected void configure(AuthenticationManagerBuilder auth) throws Exception { //下面這兩行配置表示在記憶體中配置了兩個使用者 auth.inMemoryAuthentication() .withUser("javaboy").roles("admin").password("$2a$10$OR3VSksVAmCzc.7WeaRPR.t0wyCsIj24k0Bne8iKWV1o.V9wsP8Xe") .and() .withUser("lisi").roles("user").password("$2a$10$p1H8iWa8I4.CA.7Z8bwLjes91ZpY.rYREGHQEInNtAp4NzL6PLKxi"); } @Bean PasswordEncoder passwordEncoder() { return new BCryptPasswordEncoder(); } }
這裡我們在 configure 方法中配置了兩個使用者,使用者的密碼都是加密之後的字串(明文是 123),從 Spring5 開始,強制要求密碼要加密,如果非不想加密,可以使用一個過期的 PasswordEncoder 的例項 NoOpPasswordEncoder,但是不建議這麼做,畢竟不安全。
Spring Security 中提供了 BCryptPasswordEncoder 密碼編碼工具,可以非常方便的實現密碼的加密加鹽,相同明文加密出來的結果總是不同,這樣就不需要使用者去額外儲存鹽
的欄位了,這一點比 Shiro 要方便很多。
4.登入配置
對於登入介面,登入成功後的響應,登入失敗後的響應,我們都可以在 WebSecurityConfigurerAdapter 的實現類中進行配置。例如下面這樣:
@Configuration public class SecurityConfig extends WebSecurityConfigurerAdapter { @Autowired VerifyCodeFilter verifyCodeFilter; @Override protected void configure(HttpSecurity http) throws Exception { http.addFilterBefore(verifyCodeFilter,UsernamePasswordAuthenticationFilter.class); http .authorizeRequests()//開啟登入配置 .antMatchers("/hello").hasRole("admin")//表示訪問 /hello 這個介面,需要具備 admin 這個角色 .anyRequest().authenticated()//表示剩餘的其他介面,登入之後就能訪問 .and() .formLogin() //定義登入頁面,未登入時,訪問一個需要登入之後才能訪問的介面,會自動跳轉到該頁面 .loginPage("/login_p") //登入處理介面 .loginProcessingUrl("/doLogin") //定義登入時,使用者名稱的 key,預設為 username .usernameParameter("uname") //定義登入時,使用者密碼的 key,預設為 password .passwordParameter("passwd") //登入成功的處理器 .successHandler(new AuthenticationSuccessHandler() { @Override public void onAuthenticationSuccess(HttpServletRequest req,HttpServletResponse resp,Authentication authentication) throws IOException,ServletException { resp.setContentType("application/json;charset=utf-8"); PrintWriter out = resp.getWriter(); out.write("success"); out.flush(); } }) .failureHandler(new AuthenticationFailureHandler() { @Override public void onAuthenticationFailure(HttpServletRequest req,AuthenticationException exception) throws IOException,ServletException { resp.setContentType("application/json;charset=utf-8"); PrintWriter out = resp.getWriter(); out.write("fail"); out.flush(); } }) .permitAll()//和表單登入相關的介面統統都直接通過 .and() .logout() .logoutUrl("/logout") .logoutSuccessHandler(new LogoutSuccessHandler() { @Override public void onLogoutSuccess(HttpServletRequest req,ServletException { resp.setContentType("application/json;charset=utf-8"); PrintWriter out = resp.getWriter(); out.write("logout success"); out.flush(); } }) .permitAll() .and() .httpBasic() .and() .csrf().disable(); } }
我們可以在 successHandler 方法中,配置登入成功的回撥,如果是前後端分離開發的話,登入成功後返回 JSON 即可,同理,failureHandler 方法中配置登入失敗的回撥,logoutSuccessHandler 中則配置登出成功的回撥。
5.忽略攔截
如果某一個請求地址不需要攔截的話,有兩種方式實現:
- 設定該地址匿名訪問
- 直接過濾掉該地址,即該地址不走 Spring Security 過濾器鏈
推薦使用第二種方案,配置如下:
@Configuration public class SecurityConfig extends WebSecurityConfigurerAdapter { @Override public void configure(WebSecurity web) throws Exception { web.ignoring().antMatchers("/vercode"); } }
Spring Security 另外一個強大之處就是它可以結合 OAuth2 ,玩出更多的花樣出來,這些我們在後面的文章中再和大家細細介紹。
到此這篇關於手把手帶你入門 Spring Security的文章就介紹到這了,更多相關入門 Spring Security內容請搜尋我們以前的文章或繼續瀏覽下面的相關文章希望大家以後多多支援我們!