golang編譯過程中報錯running gcc failed: exit status 1解決方法
技術標籤:golang
編譯build-rancherd的過程中,報錯:
# github.com/rancher/rancher/cmd/rancherd /usr/local/go/pkg/tool/linux_amd64/link: running gcc failed: exit status 1 /usr/bin/ld: cannot find -ldl /usr/bin/ld: cannot find -lpthread /usr/bin/ld: cannot find -ldl /usr/bin/ld: cannot find -lc collect2: error: ld returned 1 exit status
解決方法:
yum install glibc-static.x86_64 -y
相關推薦
golang編譯過程中報錯running gcc failed: exit status 1解決方法
技術標籤:golang 編譯build-rancherd的過程中,報錯: # github.com/rancher/rancher/cmd/rancherd
Linux安裝python3.8時,編譯過程中報錯Could not build the ssl module!
技術標籤:【-------Python------】PythonPythonssl 一、 Python編譯安裝缺失模組_ctypes build correctly but finished with this message:
編譯redis6報錯/usr/bin/ld: cannot find -latomic解決方法
少環境 --->原文:https://bbs.huaweicloud.com/forum/thread-59424-1-1.html latomic代表的是 libatomic.so,也即是在編譯的過程中,需要libatomic.so庫,而系統又找不到這個庫;
【xviz】./scripts/run-kitti-example.sh執行過程中報錯gyp ERR! Node-gyp failed to build your package.
xviz github:https://github.com/uber/xviz xviz github的的指南中有以下步驟: # Download KITTI data
中匯入ai檔案_DMP檔案匯入過程中報錯
技術標籤:中匯入ai檔案 問題起始:同樣的檔案導另一庫報錯問題根源:資料庫服務端字符集問題問題解決:AL32UTF8轉換為ZHX16GBK即可
docker-compose 安裝問題:error: command 'i686-linux-gnu-gcc' failed with exit status 1
# sudo pip3.5 install docker-compose 安裝docker-compose的時候報錯如下: no previously-included directories found matching \'docs/_build\'
GitHub DeskTop 上傳檔案報錯 Commit failed - exit code 1 received
同事交接Java專案,想上傳到GitHub 使用GitHub DeskTop 把倉庫克隆到本地 準備上傳檔案,彈窗報錯Commit failed - exit code 1 received
CentOS7 安裝psutil模組失敗command 'gcc' failed with exit status 1
CentOS安裝psutil包: python版本:3.6 wget https://pypi.python.org/packages/source/p/psutil/psutil-3.2.1.tar.gz --no-check-certificate
執行vbs指令碼報錯無效字元、中文亂碼的解決方法(編碼問題)
程式碼沒有問題,總是報這樣的錯誤。 測試程式碼 msgbox \"我們\" 很簡單的程式碼,但如果編碼不對問題就很多
Django重灌mysql後啟動報錯:No module named ‘MySQLdb’的解決方法
發現問題 最近由於解除安裝Mysql時將很多相關依賴包都解除安裝了,重灌mysql後啟動django出現如下錯誤:
mysql 報錯 1366 Incorrect string value 原因與解決方法
問題:用python向資料庫中插入記錄時,遇到mysql 報錯 1366 Incorrect string value 解決方法:編碼問題,python中我使用的編碼為utf8,和資料庫中的編碼不一致導致的。因此需要檢視資料庫中的編碼:資料表的編碼、欄
python3安裝poster庫時報錯解決:ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
D:\\Python\\Python37-32\\test>pip install poster Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
asp在iis7報錯行號不准問題的解決方法
在Win7中做ASP開發,發現了一個非常蛋疼的問題。出現錯誤的時候,行號不準,很難快讀定位到出問題的程式碼(在Win2003的IIS6就沒有問題)。命名程式碼僅有幾十行,報錯的行號確到了幾千行(應該IIS7執行時把 asp 所有
mmdetection踩坑記錄 error: command 'g++' failed with exit status 1
最近在搭建一個基於基於mmdetection的一個環境,遇到了各種gcc g++問題: 1.\'\'ImportError: ***/miniconda3/envs/open-mmlab/lib/python3.7/site-packages/torch/../../../libstdc++.so.6: version `CXXABI_1.3.11
python 報錯 TypeError: ‘int‘ object is not subscriptable 解決方法
報錯原因 整數上加了下標不是陣列 當作陣列 使用 錯誤情況1: a = 4 c=a[2] # 或者
VBA 的 Dictionary 編譯錯誤:使用者自訂型態尚未定義解決方法
啟用 VBA 的「Microsoft Scripting Runtime」引用項目,解決 Dictionary 的「使用者自訂型態尚未定義」編譯錯誤。
VBA 正規表示法 RegExp 編譯錯誤:使用者自訂型態尚未定義解決方法
啟用 VBA 的「Microsoft VBScript Regular Expressions」引用項目,解決使用正規表示法 RegExp 時所產生的「使用者自訂型態尚未定義」編譯錯誤。
SIMOTION D435-2 PN報錯1915,無法進入RUN狀態 解決方法
1.現象 2.解決方法 以下幾種情況會導致SIMOTIONDCPU無法RUN狀態: 1.SIMOTIOND設定CPU上電後自動進入RUN狀態,上電後D4x5CPU準備就緒,開始執行系統任務區的程式,但此時SIMOTIOND內建CU320(即SINAMICS_Integrated
使用 SWIG 時遇到“Assertion Failed”——問題原因與解決方法
目錄使用 SWIG 時遇到 “Assertion Failed”——問題原因與解決方法問題解決 使用 SWIG 時遇到 “Assertion Failed”——問題原因與解決方法
pahole編譯過程libbpf: failed to find valid kernel BTF
下載原始碼: git clone https://kernel.googlesource.com/pub/scm/devel/pahole/pahole 下載libbpf原始碼: