MYSQL匯入資料出現Error 1290:The MySQL server is running with the --secure-file-priv option so it cannot ex
下面來告訴大家win10系統點選關機就自動重啟怎麼解決。
1、在桌面上“此電腦”滑鼠右鍵,彈出的快捷選單單擊“屬性”命令。
2、然後,點選左側的【高階系統設定】。
3、開啟【高階系統設定】視窗,切換到【高階】選項卡,單擊“啟動和故障恢復”的“設定”按鈕。如圖所示。
4、在“系統失敗”選項下將【自動重新啟動】的複選框去掉,也就是去掉勾,然後點選“確定”按鈕,使系統設定生效。
然後關閉電腦,看看是否還會自動重啟。
相關推薦
MYSQL匯入資料出現Error 1290:The MySQL server is running with the --secure-file-priv option so it cannot ex
最近在學習MySQL,剛入門,在匯入資料的時候出現了Error 1290:The MySQL server is running with the --secure-file-priv option so it cannot execute this statement問題,以下的解決辦法:(2017/11/12
MySQL資料匯出時出現如下錯誤: ERROR 1290 (HY000): The MySQL server is running with the --secure-file-priv option so it cannot execute this statement
mysql> select * from db3.usertab into outfile \"/mysqldata/user2.txt\";ERROR 1290 (HY000): The MySQL server is running with the --secure-file-priv option so it cannot execute this statement
ERROR 1290 (HY000): The MySQL server is running with the --secure-file-priv option so it cannot execute this statement
mysql 匯入出錯 ERROR 1290 (HY000): The MySQL server is running with the --secure-file-priv option so it cannot execute this statement
MySQL匯入檔案報錯[HY000][1290] The MySQL server is running with the --secure-file-priv option so it cannot
技術標籤:筆記工具MySQL 問題現象: 完整的報錯資訊:[HY000][1290] The MySQL server is running with the --secure-file-priv option so it cannot execute this statement
The MySQL server is running with the --read-only option so it cannot execute this statement
正在開會,同事電話反映開發庫不能寫入了,錯誤資訊如下: 1209 - The MySQL server is running with the--read-only option so it cannot execute this statement
mysql啟動時出現ERROR 2003 (HY000)問題的解決方法
一、問題描述 在啟動MYSQL時出現問題:“ERROR 2003 (HY000): Can\'t connect to MySQL server on ‘localhost\' (10061)”,情況如圖:
mysql 主從資料不一致,提示: Slave_SQL_Running: No 的解決方法
本文例項講述了mysql 主從資料不一致,提示: Slave_SQL_Running No 的解決方法。分享給大家供大家參考,具體如下:
hive從mysql匯入資料量變多的解決方案
原始導數命令: bin/sqoop import -connect jdbc:mysql://192.168.169.128:3306/yubei -username root -password 123456 -table yl_city_mgr_evt_info --split-by rec_id -m 4 --fields-terminated-by \"\\t\" --l
linux 安裝 mysql rpm包出現error: unpacking of archive failed on file
技術標籤:mysql 安裝mysql mysql-community-commonmysql-community-libsmysql-community-clientmysql-community-server 前三個都rpm按照成功,第四個安裝失敗
cmd呼叫mysql匯入資料
資料匯入方式一: mysql -u root -h 192.168.0.123 -P 3306 -p use aliyun source sql檔案路徑 資料匯入方式二:容錯度更高
第二十一章 MySQL匯入資料常見報錯解決
一、資料表有外來鍵 #1.報錯資訊 [root@dxg-ml mysql-3306.bak]# mysql -P 13306 -u root -p < ./airflow.sql
mysql匯入資料load data infile
注意: 1)“load data infile” 和“into outfile” 預設只能和伺服器本地的磁碟互動,需要先把txt檔案上傳到伺服器上,然後執行load data infile命令。如果需要遠端異地操作,需要特殊配置,本篇不做介紹。
MySQL匯出資料遇到secure-file-priv問題的解決方法
ERROR 1290 (HY000): The MySQL server is running with the –secure-file-priv option so it cannot execute this statement.
MySQL學習筆記(20):優化MySQL Server
本文更新於2020-04-05,使用MySQL 5.7,作業系統為Deepin 15.4。 目錄MySQL體系結構MySQL記憶體優化MyISAM記憶體優化key_buffer_size設定使用多索引快取調整中點插入策略調整read_buffer_size和read_rnd_buffer_size
IDEA 出現Error during artifact deployment. See server log for details.
解決思路: a).如果出現類似的問題,第一件事情,一定要看tomcat日誌,看是否報錯
IDEA出現Error during artifact deployment. See server log for details.
第一步檢視配置然後點選Web Application Exploded->from Module, 如果以上問題都不存在,則要檢查lib下是否缺少相應的jar包,是否匯入,是否jar包過多產生衝突,一般都是這幾個個問題
note同步不及時 one_主從同步UUID問題:found a zombie dump thread with the same UUID
技術標籤:note同步不及時 one 問題現象: 環境情況: MySQL:5.7.21架構1主2從M<-->M—>SLAVE
關於.Net Core生成JSON時錯誤:A possible object cycle was detected which is not supported. This can either be due to a cycle or if the object depth is larger than the maximum allowed depth of 32.
此筆記記載了本人在.Net Core 5.0環境下生成Json資料時A possible object cycle was detected which is not supported. This can either be due to a cycle or if the object depth is larger than the maximum al
Linux:A start job is running for /etc/rc.local compatibility解決辦法
面對問題首先:Linux系統無法啟動CentOS啟動的時候讀條已經讀滿,但是沒有反應,按下任意鍵(我按的是方向鍵)跳出啟動列表,最後一條資訊:A start job is running for /etc/rc.d/rc.local Compatibility(*min,**
關於nginx error <a client request body is buffered to a temporary file>
報錯日誌 /v3.0/uploadIdentityPhoto.security HTTP/1.1\", host: \"xc-loan.nflow.internal\" 2021/11/01 15:01:50 [warn] 1028#1028: *57622584 a client request body is buffered to a temporary file /tmp/cl